Teleskop Austria Logo
LACERTA GmbH | Wien | Linz
 
BBlogger   Facebook   Instagram   YouTube   Newsletter   EN   HU   DE   JP
Teleskop Austria Logo
LACERTA GmbH | Wien | Linz
 

ZWO ASI6200MM-PRO mono camera, Back-illuminated CMOS Image Sensor (24x36mm fullframe, 62M pixels sensor)
(ZWO: ASI6200MMP)


instead of 5435.00 only
5027.89 EUR
(Gross prices are calculated with 19% or 7% VAT. If your country-specific VAT is higher, we take over LACERTA GmbH the additional tax costs)
plus shipping
 

Brandname:  ZWO
Type: CMOS-mono
Chip diagonal: 43,2mm
Resolution: 61,2MP
Shipping weight:  2kg (Shipping costs)

Availability
(The stock is for information only and includes items that have already been reserved)
Wien: pre-ordering availble
Linz: pre-ordering availble
Warehouse: pre-ordering availble
Opening hours

Seen cheaper weiter...
We recommend:
ASI6200MCP
5027.89 EUR
 
ZWOEFW7x2
598.89 EUR
 
OpLRGBCCD2
318.88 EUR
 
OpSHO65CCD2
518.88 EUR
 

ASI6200MM Pro uses Sony’s latest back-illuminated IMX455 Full Frame format native 16-bit ADC sensor. It has3.76µm, ultra-low 1.2e readout noise and an innovative breakthrough resulting in zero amp-glow.

Amazing Craftsmanship, Lightweight body, Solid image quality

We have been working hard to reduce the weight of the camera while improving the performance of the camera. After years of technical accumulation and repeated weight loss experiments by ZWO engineers, ZWO finally concentrated the ASI6200 to 0.7KG

Full Frame format

The ASI6200MM Pro uses full frame format, the sensor length and width are 36mm * 24mm and the diagonal is 43.3mm. This is a 62MP camera with a small pixel size of 3.76um that can accommodate a large well depth of 51.4ke.

Native 16bit ADC

ASI6200MM Pro is our first batch of CMOS astronomy cameras with 16bit ADC. This 16bit ADC is not a CCD 16bit ADC, and it can really achieve a dynamic range output of 14 stops. This significantly improves the image sharpness and contrast, and the color changes are smoother and more natural.

IMX455 backlit sensor

Sony’s back-illuminated CMOS image sensor improves sensitivity and noise reduction – the key factors to enhancing image quality, while radically realigning their fundamental pixel structure from front-illumination to back-illumination. It has retained the advantages of CMOS image sensors such as low power consumption and high-speed operation.

With a conventional front-illumination structure, the metal wiring and transistors on the surface of the silicon substrate that form the sensor’s light-sensitive area (photo-diode) impede photon gathering carried out by the on-chip lens. A back-illuminated structure minimizes the degradation of sensitivity to optical angle response, while also increasing the amount of light that enters each pixel due to the lack of obstacles such as metal wiring and transistors that have been moved to the reverse of the silicon substrate.

Sony has newly developed a unique photo-diode structure and on-chip lens optimized for back-illuminated structures, that achieves a higher sensitivity and a lower random noise without light by reducing noise, dark current and defect pixels compared to the conventional front-illuminated structure.

Camera Performance

The ASI6200MM Pro has excellent performance with a dynamic range of up to 14stops. When the gain value is 100, the magical HCG high gain mode is turned on, the readout noise is greatly reduced, and the dynamic range is basically unchanged. It is recommended to set the gain to 0 or gain 100 in deep space.

Zero Amp Glow

Traditional CMOS sensors produce a weak infrared light source during operation quite often seen in the corner of uncalibrated images as the tell tale signs of ‘amp glow’. As the ASI6200MM Pro uses zero amp glow circuitry, you won’t have to worry about amp glow even when using high gain, long exposure imaging.

Anti-dew

ASI6200MM Pro comes with the polyimide heater that can avoid any dew problems. The anti-dew heater  which completely fit the  protective window will heat it to avoid any dew problems. The heat anti-dew heater power is around 5W and can be turn off  in software to save power.

QE value

We suppose that the QE peak value of the ASI6200MM Pro is above 80%.

Two-stage TEC cooling, ultra-low dark current

ASI6200MM Pro uses two stage TEC cooling that can lower the CMOS sensor temperature to more that 35c below ambient, which can greatly reduce dark current generation and sensor noise even with extended exposure times.

The unique dark current suppression technology can even further reduce dark current noise.

At a cooling temperature of 0 °, the dark current noise is only 0.003e/s/pix. Which means 300s exposure can only cause 0.9e dark current noise, which is completely negligible!

USB3.0 & 256M DDR3 Memory

The ASI6200MM Pro is equipped with a USB 3.0 transmission interface and a built-in 256MB DDR3 cache to ensure stable and secure data transmission. Under long exposure, it effectively avoids frame dropping and greatly reduces the glow effect caused by slow reading speed.

#ZWOSummerSale #ZWOWinter


We recommend:
ASI6200MCP ZWO ASI6200MC Pro color camera, Back-illuminated CMOS Image Sensor (APS-C, 16M pixel, 14bit) 5027.89 EUR
 
ZWOEFW7x2 ZWO motorized filterwheel 7 positions 2"or 50.4mm filters 598.89 EUR
 
OpLRGBCCD2 OPTOLONG LRGB CCD Filter-Set (50.8mm) 318.88 EUR
 
OpSHO65CCD2 OPTOLONG S-II / H-alpha / O-III (6.5nm) CCD Filter-Set (50,8mm) 518.88 EUR
 
M54pM48n M54pM48n short adapter M54pos to M48neg - for Atik filterwheels 39.90 EUR
 
T2M54 Adaptor T2 internal and M54 external 19.90 EUR
 
M54pM48p adapter for Takahashi correctors, with M54x0.75pos and M48x0,75pos threads, plus 2" filter thread 39.90 EUR
 
M54pM68p Takahashi CCD Adaptor 4 to M68x1 thread for large CCD-Cams 79.90 EUR
 
Stab5 5A, 12V stabilized power supply for HEQ5 or EQ6 (with 220V plug) 39.90 EUR
 

SUPPORT

Video

Photos

 KALENDARIUM
INFO!
Code: MGEN-3 | The delivery situation is still stable:
All required components are currently in stock in our central warehouse.
New orders will be completed in about 2-3 working days after receipt of payment.

more infos

INFO!
Code: FN2008c-new | The delivery situation has improved:
Delivery time for new orders: ca. 120 days
Payments are requested ASAP after our finalization and test notification!

more infos

INFO!
Code: FN25010c-new | The delivery situation has improved:
Delivery time for new orders: ca. 120 days
Payments are requested ASAP after our notification that the FN is finished and tested!

more infos

INFO!
Darkfieldmicroscopes We configure your dark field microscope according to your wishes.
New orders will be completed in about 2 months after receipt of payment.

more infos


  • Impressum and Terms
    Company data
    Terms and conditions
    exclusion of liability
    Copyright
    revocation instruction


  • © 2005-2019 Lacerta GmbH.
    All rights reserved.